Resin SZUV-T1150-elu okpom?k? na-eguzogide
Okwu mmalite
Njirimara:
SZUV -T1150 b? resin SL edo edo nke nwere ar?m?r? ?k? na-enwegh? at?. ? nwere ike idi okpom?k? kar?a 200 ℃ na obere oge na 120 ℃ na ogologo oge. Emebere ya maka ijikwa ?d? okpom?k? d? iche iche na ngwa nnwale ?j??.
At?mat? ah?kar?
Ike d? elu na ezigbo nguzogide
SZUV-T1150 nwere ike iguzo iru mmiri, mmiri na ihe mgbaze, d? ka mman? ?gb?ala, nnyefe mmiri mmiri, mman? na coolant. Site na nguzogide okpom?k? ya na-enwegh? at?, ? dabara adaba maka ?gbasa, HVAC, ?k?, ngwá ?r?, ?kp?zi na ngwa nyocha ?wara ikuku.
Mee ngwa ngwa ma wulite ngwa ngwa
Site n'inye ngwa ngwa ngwa ngwa na ak?k? na elu d? lar??, d? mfe ijikwa, SZUV-T1150 nwere ike imecha ?r? g? site na ?b?aru na ak?k? ule na obere oge.
Ngwa a na-ah?kar?
-Nnwale ak?r?ngwa n'okpuru mkpuchi
-Elu okpom?k? RTV ?kp?zi
-Nnwale ?wara ikuku
-Nnwale ?k? ?k?
- Ngwa ?r? autoclave mejup?tara
-Nnwale ak?r?ngwa HVAC
-Nnyocha nke ukwuu
- Orthodontics
Ngwa ngwa
Ag?makw?kw?
Akp?kp? aka
Ak?k? akpaaka
Nkwak? ngwaah?a
Nhazi nka
?gw?
?
| ?d?d? | ?cha |
| Njup?ta | 1.13g / cm3@ 25 ℃ |
| Viscosity | 430~510 cps @ 27 ℃ |
| Dp | 0.155 mm |
| Ec | 7.3mJ/cm2 |
| ?l? oyi akwa ?kp?r?kp? | 0.05 ~ 0.12mm |
?
| Nt? | Usoro ule | Uru | |
| Ngw?ta UV nke nkeji 90 | 90-nkeji UV +2 awa @ 160 ℃ ?gw?gw? ?k? gachara | ||
| Hardness, Shore D | ASTM D2240 | 88 | 92 |
| Mgbanwe mgbanwe, Mpa | ASTM D790 | 2776-3284 | 3601-3728 |
| Ike mgbanwe, Mpa | ASTM D790 | 63-84 | 92-105 |
| modul tensile, MPa | ASTM D638 | 2942-3233 | 3581-3878 |
| Ike tensile, MPa | ASTM D638 | 60-71 | 55-65 |
| Elongation na ezumike | ASTM D638 | 4-7% | 4-6% |
| Ike mmet?ta, ?p?r?iche lzod, J/m | ASTM D256 | 12-23 | 11-19 |
| Okpom?k? ngbanwe, ℃ | ASTM D 648 @66PSI | 91 | 108 |
| Ntughar? iko, Tg, ℃ | DMA, elu | 120 | 132 |
| ?n??g? nke mgbasawanye thermal, E6/℃ | TMA (T | 78 | 85 |
| Nr?p?ta ?k?, W/m.℃ | ? | 0.179 | ? |
| Njup?ta | ? | 1.26 | ? |
| Ntinye mmiri | ASTM D 570-98 | 0.48% | 0.45% |
?
?
?
?
?
?
?
?
?
?
?
?
?
