Jerin DQ Super-Large 3D Printers-FDM 3D Printer
Siffofin
Aikace-aikace
Samfura, ilimi da bincike na kimiyya, ?ir?ira al'adu, ?irar fitila da masana'anta, ?ir?ira al'adu da rayarwa, ?irar fasaha
?
Samfurori Buga
?
?
?
| Samfura | DQ751 | DQ752 | DQ800 | DQ1000 | DQ1200 |
| Hoto | ? | ? | |||
| Launin jiki | Fari/Baki (wanda za a iya daidaita shi) | ||||
| Fasaha | FDM (narkewar ajiya mai hade) | ||||
| Gina ?ara | 750*750*750mm | 750*750*1000mm | 800*800*800mm | 1000*1000*1000mm | 1200*1200*1200mm |
| Layer kauri | Extruder guda ?aya, fitarwa biyu na shigarwa biyu ko shigarwa biyu, fitarwa guda ?aya | ||||
| Buga daidaito | Plastics kasa farantin | Aluminum substrate dumama gado | |||
| Saurin bugawa | 0.1-1.2mm | ||||
| Yawan fitarwa | ± 0.2mm | ||||
| Diamita na bututun ?arfe | 50-150mm/S | ||||
| Kayan abu | 110/220V, 50HZ | ||||
| Buga dandamali | DC24V | ||||
| Wutar shigar da wutar lantarki | 0.4mm (na za?i) | ||||
| Fitar wutar lantarki | PLA, TPU da sauran FLEX masu sassauci tare da diamita na 1.75 mm | ||||
| Interface | 3.5 inch, CN/EN allon ta?awa mai launi (inch 7 da 10 inch za?i ne) | 10 inch, CN/EN allon ta?awa mai launi | |||
| Tsarin fayil | STL, OBJ, GCDE, X3G | ||||
| Tsarin aiki | Windows 7/10 / XP | ||||
| Yanayin bugawa | Kebul na kan layi 3D bugu / Katin SD offline 3D bugu | ||||
| ?arin fasali | Ci gaba da gazawar wutar lantarki, gano filament, hasken LED (WIFI za?i ne) | ||||
| Yanayin aiki | Zazzabi: 10-30 ℃, Humidity: ?asa da 40% | ||||
?
